Dear s! Please post bug reports about FDM here!

FDM 3.9.1 Release Candidate 5r4b2j

s: Alex 4wcb

Alex
FDM Team
Posts: 2947
ed: Mon Jul 12, 2004 12:17 pm

FDM 3.9.1 Release Candidate 5r4b2j

Alex » Wed May 02, 2012 8:20 pm

Hi!

Dear s! We would like you to test this one yet another beta version of FDM.
It seems it should work even better than the 3.8 final version we released recently.
But it introduces an opportunity to RTSP/MMS video.

We would like our s to test it and tell us about the result.
Please notice that this version uses newer format of its service files which is incompatible with the previous versions of FDM.

3.9.1 RC

3.9.1 RC build 1275. (Dec 26, 2012)
Changes:
[+] Auto update system for Firefox extension.
[-] Problem under Internet Explorer 10.
[-] Some bugs.


3.9.1 BETA build 1268. (Sep 3, 2012)
Changes:
[*] Firefox max version set to 20 (just for testing purposes).
[-] Problems integrating portable version into Internet Explorer under Windows 7.


3.9.1 BETA build 1264. (Jul 19, 2012)
Changes:
[-] FDM could not start in some cases.


3.9.1 BETA build 1263. (Jul 17, 2012)
Changes:
[-] Bug in Bittorrent s properties window.
[-] Bug in Firefox extension.


3.9.1 BETA build 1261. (Jun 22, 2012)
Changes:
[-] Bug in saving list of deleted s.
[-] Firefox crashed when entering URL to a file in the address bar.


3.9.1 BETA build 1256. (Jun 4, 2012)
Changes:
[*] of "Decrease traffic usage on browser activity" option for Firefox browser.
[-] Bug in saving the list of s.


3.9.1 BETA build 1252. (May 4, 2012)
Changes:
[+] FDM saves list of s and other service data only when it's required.
[-] List of s could not be saved in some cases (bug of 1250th build).


3.9.1 BETA build 1250. (May 2, 2012)
Changes:
[+] RTSP/MMS s
[-] A pack of general bug fixes.
Alex,
FDM development team
Top
Guest

Re: FDM 3.9.1 BETA 6h571d

Postby Guest » Wed May 02, 2012 9:59 pm

thank you for that new version FDM 3.9.1 BETA build 1250...

i noticed, that it is possible to open the some dialogs (e.g. "HTML Spider default settings"-dialog) more than once at the same time, what will accidently reject the settings when done in the "wrong" dialog one.
e.g. "Options" -> "Settings" -> "s" -> "New s" -> ["Default settings for site s"]

all the dialogs in that settings tab may appears more than once at the same time, if the buttons will clicked... that made settings may run into unwanted behavior.
the dialogs should open in a "modal"-mode.

i don't know if that is a new issue or if it was already an issue in the versions before.

Windows 7 64bit
FDM 3.9.1 BETA build 1250
Top
PGomersall

Re: FDM 3.9.1 BETA 6h571d

Postby PGomersall » Thu May 03, 2012 9:34 pm

Just tested this version on Windows 8 x64. Its interoperability with IE10 seems to be compromised. After installation, many web sites become unusable with the pages not rendering properly. Removing the product returns IE to proper operation. I am not sure if the 3.9 version works - I will let you know.
Pete
Top
navaljayhawk
Posts: 3
ed: Fri Nov 11, 2011 2:08 pm

Re: FDM 3.9.1 BETA 6h571d

navaljayhawk » Fri May 04, 2012 11:43 am

Ref 3.9.1 beta, I installed it and then installed firefox 13, it works fine, so far no problems, I have not found any problems thus far.
Top
Blackcrack
Posts: 53
ed: Sun Jul 11, 2004 10:00 pm
Location:
:

Re: FDM 3.9.1 BETA 6h571d

Blackcrack » Fri May 04, 2012 6:07 pm

Hy Alex

Install.rdf
~~~~

<em:targetApplication> <!-- Firefox -->
<Description>
<em:id>{ec8030f7-c20a-464f-9b0e-13a3a9e97384}</em:id>
<em:minVersion>1.5</em:minVersion>
<em:maxVersion>14.*.*</em:maxVersion>
</Description>
</em:targetApplication>

~~~~~



i had added it " .*" to use in the new FF Aurora
the way it is goes to 3 places like 14.*.* or 18.*.*

Alex use in future 3 places and it whant no compatibility probs..

best regards
Blacky
Top
Grouch
Posts: 2
ed: Fri May 04, 2012 7:16 pm

Re: FDM 3.9.1 BETA 6h571d

Grouch » Fri May 04, 2012 7:23 pm

BitDefender has quarantined "fdmumsp.dll" with "Trojan.Heur.LP.fu4@aGwzv0jk". Is there a chance it is infected?

Thanks,
Grouch
Top
Alex
FDM Team
Posts: 2947
ed: Mon Jul 12, 2004 12:17 pm

Re: FDM 3.9.1 BETA 6h571d

Alex » Fri May 04, 2012 7:32 pm

No, it's not infected. Kaspersky, Avast, DrWeb and others found nothing in it.
https://www.virustotal.com/file/4f30d9d ... 336159752/
You may to not use this file. But integration with Internet Explorer will not work properly in this case.
Alex,

FDM development team
Top
darek

Re: FDM 3.9.1 BETA 6h571d

Postby darek » Fri May 04, 2012 7:58 pm

Alex wrote:Hi!

Dear s! We would like you to test this one yet another beta version of FDM.
It seems it should work even better than the 3.8 final version we released recently.
But it introduces an opportunity to RTSP/MMS video.

We would like our s to test it and tell us about the result.

3.9.1 BETA

3.9.1 BETA build 1251. (May 4, 2012)
Changes:
[+] FDM saves list of s and other service data only when it's required.
[-] List of s could not be saved in some cases (bug of 1250th build).


3.9.1 BETA build 1250. (May 2, 2012)
Changes:
[+] RTSP/MMS s
[-] A pack of general bug fixes.


Known problem: "Decrease traffic usage on browser activity" option does not work properly under Firefox browser.


Sean_john wrote:
andy_gray wrote:
marksh wrote:@ Usher, Victoria Nelson, vaneo, Alex
Hi guys great job :)
especially for the portable version
but you guys are making me use windows(no linux :( )


The new bit-torrent module has a bug
Sometimes i have to some files urgently
so i disable seeding for sometime(until that imp file is done)
but FDM doe-snot follow it & keeps seeding(ing)

Magnet links are not ed

FF extension can be available in install folder as a compressed xpi
(so i can use it in a portable version which is used on diff laptops)?
It can manually install it but that's not very easy(fdm is in a usb with changing drive letters & portable FF)


& keep up the good work &


Totally agree with this & hope it gets implemented



+1 to this especially the part of using portable FDM with portable FF(from usb drives on different machines)


will this be implemented in this version?
its an important thing :|
Top
Guest

Re: FDM 3.9.1 BETA 6h571d

Postby Guest » Fri May 04, 2012 9:15 pm

Sean_john wrote:
andy_gray wrote:
marksh wrote:@ Usher, Victoria Nelson, vaneo, Alex
Hi guys great job :)
especially for the portable version
but you guys are making me use windows(no linux :( )


The new bit-torrent module has a bug
Sometimes i have to some files urgently
so i disable seeding for sometime(until that imp file is done)
but FDM doe-snot follow it & keeps seeding(ing)

Magnet links are not ed

FF extension can be available in install folder as a compressed xpi
(so i can use it in a portable version which is used on diff laptops)?
It can manually install it but that's not very easy(fdm is in a usb with changing drive letters & portable FF)


& keep up the good work & please work on especially the part of using portable FDM with portable FF(from usb drives on different machines)


+1 to these

A bug is found in this 3.9.1 BETA build 1251

I also happen to use The portable version
so created a portable install & copied to usb & replaced the folder with all the info(settings & etc)
FDM worked fine with all the s(complete & incomplete) but after i closed and restarted FDM threw an error & all the data was gone
deleted the info(settings & etc) folder & set up FDM portable as i like(new settings & etc was created) & now it works fine

Tried to reproduce & it happens again & again
just replace the old (data folder from this build to the last rc1194 or vise-versa)

(older versions had no problems & love it to be that way as i keep jumping from stable/beta/rc)
Please Fix this(especially for portable FDM s) ALEX & keep us in mind in Future too


P.S- Am i the only girl here :P
Top
Damien

Re: FDM 3.9.1 BETA 6h571d

Postby Damien » Fri May 04, 2012 9:20 pm

Guest wrote:+1 to these

A bug is found in this 3.9.1 BETA build 1251

I also happen to use The portable version
so created a portable install & copied to usb & replaced the folder with all the info(settings & etc)
FDM worked fine with all the s(complete & incomplete) but after i closed and restarted FDM threw an error & all the data was gone
deleted the info(settings & etc) folder & set up FDM portable as i like(new settings & etc was created) & now it works fine

Tried to reproduce & it happens again & again
just replace the old (data folder from this build to the last rc1194 or vise-versa)

(older versions had no problems & love it to be that way as i keep jumping from stable/beta/rc)
Please Fix this(especially for portable FDM s) ALEX & keep us in mind in Future too


P.S- Am i the only girl here :P



Same problem with portable version
@ALEX could it be due to regression from these
[+] FDM saves list of s and other service data only when it's required
[-] List of s could not be saved in some cases (bug of 1250th build).
Top
Akhgari

Re: FDM 3.9.1 BETA 6h571d

Postby Akhgari » Fri May 04, 2012 9:28 pm

Damien wrote:
Guest wrote:+1 to these

A bug is found in this 3.9.1 BETA build 1251

I also happen to use The portable version
so created a portable install & copied to usb & replaced the folder with all the info(settings & etc)
FDM worked fine with all the s(complete & incomplete) but after i closed and restarted FDM threw an error & all the data was gone
deleted the info(settings & etc) folder & set up FDM portable as i like(new settings & etc was created) & now it works fine

Tried to reproduce & it happens again & again
just replace the old (data folder from this build to the last rc1194 or vise-versa)

(older versions had no problems & love it to be that way as i keep jumping from stable/beta/rc)
Please Fix this(especially for portable FDM s) ALEX & keep us in mind in Future too


P.S- Am i the only girl here :P



Same problem with portable version
@ALEX could it be due to regression from these
[+] FDM saves list of s and other service data only when it's required
[-] List of s could not be saved in some cases (bug of 1250th build).


exactly the same problems with me too(portable version using from thumb/SSD drive & it's awesome)
plus another bug found
non-Unicode file-name are not ed
Top
Guest

Re: FDM 3.9.1 BETA 6h571d

Postby Guest » Fri May 04, 2012 9:32 pm

Guest wrote:(..)
the dialogs should open in a "modal"-mode.
(..)
FDM 3.9.1 BETA build 1250


In FDM 3.9.1 BETA build 1251, it is still possible to open settings dialog boxes more than once at the same time.
try this:
"Options" -> "Settings" -> "s" -> "New s" -> "Advanced"-button
it will open the "Default settings" dialog as often as you click the "Advanced"-button on that /tab.

to see what i mean, watch this:
http://www.2shared.com/video/V6cQc-DG/FDM391BETAbuild1251_noneModal.html
Top
Kumi

Re: FDM 3.9.1 BETA 6h571d

Postby Kumi » Fri May 04, 2012 10:10 pm

Will you please add RTMP protocol ?

PS:Is there no menu Tab for MMS/RTSP management?

PS2:And also magnet links for bit torrent plugin.

Thanks in advance Kumi
Top
Guest

Re: FDM 3.9.1 BETA 6h571d

Postby Guest » Fri May 04, 2012 11:32 pm

Akhgari wrote:
Damien wrote:
Same problem with portable version
@ALEX could it be due to regression from these
[+] FDM saves list of s and other service data only when it's required
[-] List of s could not be saved in some cases (bug of 1250th build).


exactly the same problems with me too(portable version using from thumb/SSD drive & it's awesome)
plus another bug found
non-Unicode file-name are not ed


Verified
please fix this ASAP(cannot use stable/beta/RC portable together[same data profile] when beta/RC has a bug & i switch to stable for a while to )


Also
-agent is
ie5(can you update it with ie9/10?)
opera3.6(can you update it with 12?)
also please add maxthon


RTMP protocol ?
Is there no menu Tab for MMS/RTSP management?
And also magnet links for bit torrent plugin.

can't wait for the next build with these Fixes

P.S- FF,Chrome,Opera have cross platform in tar.bz(can be used as portable by just extracting the file with the profile folder created inside it)
can you please make FDM for linux
Top
Alex
FDM Team
Posts: 2947
ed: Mon Jul 12, 2004 12:17 pm

Re: FDM 3.9.1 BETA 6h571d

Alex » Fri May 04, 2012 11:58 pm

Same problem with portable version

Fixed in build 1252. Thanks for reports. Please re-.
Alex,

FDM development team
Top

Return to “General forum”

Who is online 2872f

s browsing this forum: No ed s and 12 guests

 

  506wm